Riding a motorcycle can be exhilarating. When it comes to maintenance, we all depend on the repair shop, but every owner needs to develop a sense of confidence every time they drive around basic maintenance knowledge. It is very important to avoid unforeseen mechanical failures. Basic technical knowledge helps keep the motorcycle in shape and running smoothly. Now, there is no need to be admitted to a car training school. Thinking of mastering your own motorcycle repair? Absolutely not necessary! The basic skill of maintenance will help you stay independent, save time, save money, and avoid accidents.

Change engine oil:

Your motorcycle has an owner’s manual where you can find out how often to change the engine oil. Generally, technicians advise changing the oil after traveling 2,500 kilometers. Sometimes this figure varies depending on the type of oil used (mineral, semi-synthetic, fully synthetic). Then you can change the oil with a wrench. It is not so difficult.

Check tire pressure:

You just need a tire gauge to check the pressure. Manufacturers generally recommend room temperature, that is, when the tires are cold, to check the pressure. Pressure recommendation varies by specific model. These details can be found in the manual. If pressure is low, consider air fill. If you have a personal compressor or just a bike pump at home, do it now.

Clean the air filter:

Whether it’s a paper filter, cotton filter, or foam filter, inspect for cleanliness every time you change the engine oil. Remove the filter from its housing and clean it properly following the manual. If it is a paper filter, it cannot be cleaned. For satisfaction, blow air to clean. If it is foam, use air flow and in the case of cotton, you can use cleaning liquid. It will help your engine get plenty of fresh air.

Check the battery:

Battery performance depends on quality and maintenance. If the battery is more than 3 years old, it’s time to err on the side of caution. It should be inspected and replaced immediately if it does not hold a charge. If you are facing low light, problem in booting, etc. check the voltage scale test using a multimeter.

Lubricate cables and chain:

It is very important to oil and grease the cable housing, chain and some other pulling accessories. Consider greasing points like slide points, pivot points, and swivel points. So lubricate whenever you find these dry spots.

Clean the body:

This task should be done at regular intervals to protect the motorcycle from dirt and protect the original paint. Regular cleaning also helps prevent debris on iron parts and maintains a shiny appearance.

All of the above require a bit of effort to maintain the vehicle and enjoy a carefree ride. These maintenance efforts require some automotive technical knowledge. Once you start making time, everything will be easy.