Concrete is one of the most widely used building materials in the world and perhaps one of the most durable. Just because it’s durable and tough doesn’t mean you can’t develop problems over time. Any operation that implements the cutting and drilling of concrete must include on-the-job safety training and equipment. Concrete cutting worker training should include workplace safety, addressing hazards associated with demolition of patios, sidewalks, driveways, retaining walls, and concrete structures. No concrete problems can occur if you hire trained personnel familiar with all relevant safety practices and procedures for the work to be performed.
When choosing a company for concrete cutting, they must present the equipment they are going to use, the operating and shutdown procedures according to their operating status. Every project, whether heavy or soft demolition, includes the risk of sudden and violent saw movements during cutting operations. Workers are more likely to suffer if the saw changes the direction of the cut and becomes unwieldy. Kickbacks have many causes, so we must take a methodical approach to minimize risk when dealing with embedded objects.
People who routinely work with concrete are at high risk of reverse cutting hazards, especially if they are not properly trained. The reverse cut is made at the top of the slab while the machine is held above shoulder height. Under no circumstances should water-cooled saws be non-electric and should never be used in reverse cuts due to the risk of injury.
Dust and gases are mainly generated by cutting and drilling procedures during dry operations. Examples do not include water or liquid nitrogen when working in furnaces when saws need to cool down. It is suggested that the ventilation system can reduce dust and can protect workers from fibers and other toxic effects caused by silica and asbestos.
In some cases, excessive cutting and drilling noise is a potential workplace hazard because an operator’s hearing can be impaired by very loud noise over a long period of time. When working with hazardous surfaces of this type, it is suggested to use on-site equipment during all work days while doing activities with a lot of noise. Some of the most successful safety rules implemented different models of noise reduction blades carefully chosen for any particular job and proper maintenance of hearing protectors.
Electrical cables, water or gas pipes – The dangers caused by electricity during concrete cutting cannot be emphasized enough. Grout that forms from water always increases the chances of electrocution; therefore, it is necessary to remove it with a dry or wet vacuum cleaner. The control and removal of environmental concrete grout is widely used for protection whenever possible.
The most common concrete drilling and cutting project involves risks, so it is important for us to follow certain established safety measures. Saws must be inspected daily and each project must be analyzed in conjunction with communication and consultation to keep track of any potential damage or injury. The concrete cutting company implements regular supervision and training as an imperative in all concrete and masonry cutting and drilling operations.
